Photography Basics Chapter 1: 5 Elements of Exposure The Exposure Triangle A photographer must understand the relationship between ISO (how sensitive the light sensor will be to light), f-stop/aperture (how much light is allowed to pass through the lens), and shutter speed (how rapidly the shutter closes, cutting off the incoming light). Any adjustment to one of these settings will impact the others. It is up to the photographer to set all three in balance, to achieve the desired depth of field, motion blur, and exposure. The 5 Elements of Exposure ISO The International Organization for Standardization (ISO) established a numerical scale to rate how sensitive different kinds of film were to light. This scale was retained for digital cameras. When you change the ISO value on a DSLR, you can think of it as changing film to  something more or less light sensitive to what is currently in the camera. A big advantage of a digital camera is that you can change the ISO from shot to shot, instead of only per roll of film. Higher ISO numbers are more light sensitive, meaning the camera will be able to take pictures in darker environments. However, higher ISO numbers also tend to produce grainier images. Examples: ISO 100: suitable for a bright, sunny day ISO 800: indoor spaces when not using a flash ISO 1600: dim or even dark environments Aperture Determines how much light is allowed to enter the camera to reach the imaging sensor and measured in F-Stop. This is controlled mechanically, by opening or closing the camera  aperture . Different lenses have different apertures, handling different f-stop ranges. Aperture also determines the Depth of Field. Lower f-stop numbers indicate that the aperture is more open, allowing in more light. Lower f-stop numbers also narrow the depth of field, causing the area of focus to be relatively shallow, with foreground and background parts of the image being out of focus. Examples: f/1.2 - f/2.8 - lets in a lot of light; shallow depth of field f/4 - f/8 - useful in many scenarios; somewhat wider depth of field f/11 - f/32 - best for bright settings; wide depth of field The “depth of field” is the distance between the nearest and furthest in-focus objects in an image. A narrow depth of field will have a very narrow area in which objects will be in focus. A wide depth of field will put most elements of the image in focus. Turning the focus ring will adjust the position of the in-focus area, or  focal point . Shallow Depth of Field Aperture Wide Depth of Field Aperture = f/1.4 DOF = 0.8cm f/4.0 DOF = 2.2cm Aperture = f/22 DOF 12.4 Shutter Speed The shutter speed, aka exposure time, is the time that the image sensor is exposed to light when capturing an image. The  shutter is a mechanical window inside the camera that opens and closes to allow light into the sensor for a selected amount of time. A fast shutter speed, such as 1/1000 of a second, will allow light into the sensor extremely briefly. This will work in bright lighting conditions, but may not allow enough light to impact the sensor in dimmer light. An extremely slow shutter speed, for example ½ second, 1 second, or even more, will allow a lot of light into the sensor and can be useful in low light conditions. However, a lot can happen over a few seconds. Long exposure times may create “motion blur” for any moving object within the frame (or for the whole frame if the camera itself is moving). This may or may not be a desired artistic effect. Filtration Acts like sunglasses for the lens, helps reduce the intensity of the light entering the camera without changing the color. Examples: ND Filters, CPL filters, etc. External Lights Physical light on set. Using external lights gives you more control of the shadows, contrast, brightness, which all affects the overall exposure. Other Important Things to Note White Balance What is determined by white light from the camera, what is measured as white. Higher temperatures are cooler (blue tint), lower temperatures are warmer (orange tint). Baseline is whatever you set it to, everything below the baseline is orange or warmer, everything above the baseline is bluer or cooler.  Measured in Kelvin (temperature)  Daylight = 5500-5600 Fluorescents/Camera Flash = 5000 Light bulbs = 3200 Candle Light = 2000 Over- and Under-Exposed Overexposed images may look “too bright” because they were captured with settings to allow an overabundance of light into the sensor. An unwanted overexposure might happen because ISO was set too high, f-stop was set too low, or shutter speed was set too high. Underexposed images may look “too dark” because they were captured with settings to allow less than expected light into the sensor. An unwanted underexposure might happen because ISO was set too low, f-stop was set too high, or shutter speed was set too low. Chapter 2: Elements of Exposure, ISO ISO  stands for the International Organization for Standardization (it is technically not an acronym ). This organization established a numerical scale to rate how sensitive different kinds of film were to light (called a film's speed ). The current standard dates to 1974.  The ISO film speed standard was retained for digital cameras, even though light sensitivity is now determined by the camera's computer software and light sensor hardware, rather than the chemical composition of film.  When you change the ISO value on a DSLR, you may think of it as swapping out a physical roll of film and replacing it with a new roll that is more sensitive or less sensitive to light. One big advantage of a digital camera is that you can change the ISO with the press of a button and from shot to shot, instead of only when you change the roll of film. Here are some important things to know about camera ISO: Higher ISO numbers are more suitable for dark environments  but make the image grainier .   Lower ISO numbers are more suitable for bright environments and the image will usually be less grainy . ISO 100 : Suitable for a bright, sunny day ISO 800 : Suitable for indoor spaces when not using a flash ISO 1600+ : Suitable for dim or dark environments (but the picture will be increasingly grainy looking ) In the diagram below, note how the higher ISO number produces a much lighter, but also much grainier image. Chapter 3: Elements of Exposure, Aperture The F-Stop setting determines how much light is allowed to enter a camera through the lens to reach the imaging sensor. F-stop is normally a setting of the lens that is attached to the camera, and is controlled mechanically, by opening or closing the lens aperture . Different lenses have different apertures and so can handle different f-stop ranges.  The  Canon EF 24-105mm f/4L IS II USM lens that is normally kept on the SCiL DSLR cameras has an adjustable f-stop range from f/4 (wide open) to f/22 (nearly closed). It will retain the f-stop you set through its entire zoom range from 24mm to 105mm. When the camera is set to video mode , you can set the f-stop on the Canon EOS 5D Mk IV using the  large dial around the "set" button located at the lower right of the camera body. Lower f-stop numbers (like f/4) indicate that the aperture is more open , allowing in more light . Higher f-stop numbers (like f/22) indicate that the aperture is more closed , a llowing in less light . F-stop settings influence the  depth of field . f/1.2 - f/2.8 - lets in a lot of light , with a correspondingly shallow depth of field . f/4 - f/8 - useful in many scenarios, with a somewhat wider depth of field . f/11 - f/32 - best for bright settings , with a wide depth of field . In the chart below, see how different  f-stop settings change the amount of light reaching the sensor and the depth of field : Chapter 4: Elements of Exposure, Shutter Speed The shutter speed , aka exposure time , is the time that the image sensor is exposed to light when capturing an image. The shutter is a mechanical window inside the camera that opens and closes to allow light into the sensor for a selected amount of time. This video explains more about different types of camera shutter . Shutter speed is not necessarily the same as frame rate , which determines how many exposures will be taken per second. For example, it is possible to have a frame rate of 24 frames per second (fps) but have a shutter speed (exposure time) of 1/1000 of a second instead of 1/24 of a second. A  fast shutter speed , such as 1/1000 of a second, will allow light into the sensor extremely briefly. This will work in bright lighting conditions but may not allow enough light to impact the sensor in dimmer light. A slower shutter speed , such as 1/250 of a second, will allow more light into the sensor, and may work better in lower light conditions. However, a lot can happen over longer periods of time, so faster moving subjects or camera movement may result in a blurry look . This could be an intentional, artistic effect, or could simply ruin your shot or take. Extremely slow shutter speeds (for example ½ second, 1 second, or more) will allow a LOT of light into the sensor and will almost certainly result in blur effects. However, these shutter speed settings could also be used to capture long exposure photos with their own unique aesthetic appeal. In the image below, note how a 1/30 second shutter speed produces an image with less blur, while a 15 second exposure time adds considerable blur to the waterfall, resulting in an appealing, soft look. Chapter 5: Elements of Exposure, Filtration Filtration in photography involves placing glass, resin, or plastic filters over the lens to control light, color, and image quality. There are three important filters you should know: ND Filters Neutral Density (ND) Filters act as sunglasses for the lens, reducing light to allow a wider aperture or slower shutter speeds for smoother motion blur in videos without overexposing. Variable ND (VND) Filters are single filters that covers a range of light reduction, offering versatility for changing lighting conditions. Polarizer Filters Circular Polarizers (CPL) cut reflections on glass or water, darken skies, and increase contrast.  These filters are good for landscape and urban scene photos/videos.  Diffusion Filters Diffusion or Mist Filters soften digital images, reduce contrast, and can create a dreamlike haze around lights sources, often used to make digital footage look more filmic. UV/Haze Filters Primarily used to protect the lens from scratches, dust, and moisture. It can also slightly reduce haze. Chapter 6: Elements of Exposure, External Lights External lights (either natural or artificial) are the primary source when determining exposure, which then dictates how you setup your camera settings. Here are some key elements when going to shoot photos: Ambient Light (Natural/Available Light) The primary light in the scene, this could be sunlight, daylight, golden hour/blue hour. Camera settings should be set to match the intensity of the light. Flash/Strobe (Artificial) Used to fill shadows or to overpower the sun. Strobes are essential when the subkect is backlit to match or exceed the brightness of the ambient background.  Quality of Light (Hard vs. Soft) Hard Light Can be direct sun or clear skies that create high contrast, intense highlights, and deep shadows. This can cause overexposure. Soft Light Can be overcast skies or diffused light, as well as golden hour. This provides gentle contrast, lower intensity, and better retention. Positioning and Direction of Light: Key Light This is the main source of light in the scene. Fill Light Helps fill in some shadows. Back Light Not always necessary, but it helps separate people from the background.  Chapter 7: White Balance Digital cameras require a certain amount of calibration to capture color information (RGB) properly . This calibration is called white balance , because the camera is being given the information it needs to identify white areas of the image and reproduce them correctly. The image below shows the same scene white balanced to different color temperatures: You can (and should) confirm or set the white balance on the Canon EOS 5D MkIV camera before capturing images or video. You can do this by pressing the WB button on the top right of the camera chassis. A menu will appear (it looks slightly different depending on whether you are shooting in image or video mode), and you can use the large dial on the right side of the camera chassis to select the white balance mode. The available white balance options are : AWB (auto white balance): the camera will seek an appropriate white balance for the current lighting conditions Daylight : the camera will set an appropriate white balance for  sunny daylight conditions Shade : the camera will set an appropriate white balance for shady daylight conditions Cloudy : the camera will set an appropriate white balance for  cloudy/overcast conditions Tungsten Light : the camera will set an appropriate white balance for tungsten light (~3200K, a warm, orange light) Fluorescent Light : the camera will set an appropriate white balance for fluorescent light , such as in an office building Flash : the camera will set an appropriate white balance for the color temperature of the camera's built-in flash Custom : you can take a photo of a white surface under desired light conditions and then use it to set the white balance Color Temperature : you can manually set the white balance to be appropriate for  different color temperatures Which setting should you use? It will depend on what you are trying to accomplish, but the most usual settings would be: AWB if you do not want to control the white balance for yourself Daylight , shade , or cloudy if you are shooting outdoors under natural light Color temperature if you are shooting in the studio and know the color temperature of your lighting conditions You should check and confirm your white balance setting before you begin a photo or video shoot. Typically, you will want to leave the white balance setting alone once you set it to your preferred selection.  Chapter 8: Depth of Field The depth of field is the distance between the nearest and furthest in-focus objects in an image. A narrow depth of field will have a very narrow area in which objects will be in focus. A wide (or large) depth of field will put most elements of the image in focus.  Depth of field is influenced by several camera settings including aperture (f-stop) and the lens focal length . Lower f-stop settings (f/1.2 - f/2.8) have shallow depths of field . Higher f-stop settings (f/11 - f/32) have wider depths of field . Longer focal lengths (like the 105mm setting on the Canon EF 24-105mm lens) will have a shallow depth of field . Shorter focal lengths (like the 24mm setting on the Canon EF 24-105mm lens) will have a wider depth of field . Turning the  focus ring on the lens will adjust the position of the in-focus area, or  focal point .   Shallow Depth of Field Aperture = f/1.4. DOF = 0.8 cm Medium Depth of Field Aperture = f/4.0. DOF = 2.2 cm Wide Depth of Field Aperture = f/22. DOF = 12.4 cm The camera's  distance to the subject can also influence depth of field . The depth of field will be wider when the camera is focused on more distant subjects . The depth of field will be shallower when the camera is focused on closer subjects . Chapter 9: Lenses Focal Length is the measurement of the lens in mm. There are two types of lenses; Prime and Zoom, and three categories; Telephoto, 50 (Normal), and Wide. Prime lenses Have only one focal length Zoom lenses Have multiple focal lengths (multifocal) Three Catepgories Telephoto 50 (normal) Wide Going up in focal length narrows the field of view (FOV), while going down in focal length widens the FOV. Examples: 200mm telephoto -> 85mm -> 50 (normal) -> 40mm -> 35mm -> 28mm -> 18mm wide -> 12mm fisheye -> 8mm. Trade offs: for wide angles, it can cause distortion, so the subjects in the frame look farther apart. For telephoto, it can narrow the FOV, making it harder to frame shots & require a higher shutter speed to avoid camera shake. Photography Basics The Exposure Triangle A photographer must understand the relationship between ISO (how sensitive the light sensor will be to light), f-stop/aperture (how much light is allowed to pass through the lens), and shutter speed (how rapidly the shutter closes, cutting off the incoming light). Any adjustment to one of these settings will impact the others. It is up to the photographer to set all three in balance, to achieve the desired depth of field, motion blur, and exposure. The 5 Elements of Exposure ISO The International Organization for Standardization (ISO) established a numerical scale to rate how sensitive different kinds of film were to light. This scale was retained for digital cameras. When you change the ISO value on a DSLR, you can think of it as changing film to  something more or less light sensitive to what is currently in the camera. A big advantage of a digital camera is that you can change the ISO from shot to shot, instead of only per roll of film. Higher ISO numbers are more light sensitive, meaning the camera will be able to take pictures in darker environments. However, higher ISO numbers also tend to produce grainier images. Examples: ISO 100: suitable for a bright, sunny day ISO 800: indoor spaces when not using a flash ISO 1600: dim or even dark environments Aperture Determines how much light is allowed to enter the camera to reach the imaging sensor and measured in F-Stop. This is controlled mechanically, by opening or closing the camera  aperture . Different lenses have different apertures, handling different f-stop ranges. Aperture also determines the Depth of Field. Lower f-stop numbers indicate that the aperture is more open, allowing in more light. Lower f-stop numbers also narrow the depth of field, causing the area of focus to be relatively shallow, with foreground and background parts of the image being out of focus. Examples: f/1.2 - f/2.8 - lets in a lot of light; shallow depth of field f/4 - f/8 - useful in many scenarios; somewhat wider depth of field f/11 - f/32 - best for bright settings; wide depth of field The “depth of field” is the distance between the nearest and furthest in-focus objects in an image. A narrow depth of field will have a very narrow area in which objects will be in focus. A wide depth of field will put most elements of the image in focus. Turning the focus ring will adjust the position of the in-focus area, or  focal point . Shallow Depth of Field Aperture Wide Depth of Field Aperture = f/1.4 DOF = 0.8cm f/4.0 DOF = 2.2cm Aperture = f/22 DOF 12.4 Shutter Speed The shutter speed, aka exposure time, is the time that the image sensor is exposed to light when capturing an image. The  shutter is a mechanical window inside the camera that opens and closes to allow light into the sensor for a selected amount of time. A fast shutter speed, such as 1/1000 of a second, will allow light into the sensor extremely briefly. This will work in bright lighting conditions, but may not allow enough light to impact the sensor in dimmer light. An extremely slow shutter speed, for example ½ second, 1 second, or even more, will allow a lot of light into the sensor and can be useful in low light conditions. However, a lot can happen over a few seconds. Long exposure times may create “motion blur” for any moving object within the frame (or for the whole frame if the camera itself is moving). This may or may not be a desired artistic effect. Filtration Acts like sunglasses for the lens, helps reduce the intensity of the light entering the camera without changing the color. Examples: ND Filters, CPL filters, etc. External Lights Physical light on set. Using external lights gives you more control of the shadows, contrast, brightness, which all affects the overall exposure. Other Important Things to Note White Balance What is determined by white light from the camera, what is measured as white. Higher temperatures are cooler (blue tint), lower temperatures are warmer (orange tint). Baseline is whatever you set it to, everything below the baseline is orange or warmer, everything above the baseline is bluer or cooler.  Measured in Kelvin (temperature)  Daylight = 5500-5600 Fluorescents/Camera Flash = 5000 Light bulbs = 3200 Candle Light = 2000 Over- and Under-Exposed Overexposed images may look “too bright” because they were captured with settings to allow an overabundance of light into the sensor. An unwanted overexposure might happen because ISO was set too high, f-stop was set too low, or shutter speed was set too high. Underexposed images may look “too dark” because they were captured with settings to allow less than expected light into the sensor. An unwanted underexposure might happen because ISO was set too low, f-stop was set too high, or shutter speed was set too low. Lenses Focal Length is the measurement of the lens in mm. Prime lenses have only one focal length.  Zoom lenses have multiple focal lengths (multifocal). There are three categories; telephoto, 50 (normal), and wide. Going up in focal length narrows the field of view (FOV), while going down in focal length widens the FOV. Examples: 200mm telephoto -> 85mm -> 50 (normal) -> 40mm -> 35mm -> 28mm -> 18mm wide -> 12mm fisheye -> 8mm. Trade offs: for wide angles, it can cause distortion, so the subjects in the frame look farther apart. For telephoto, it can narrow the FOV, making it harder to frame shots & require a higher shutter speed to avoid camera shake.