Haptic Touch Device Demo

Equipment: Quest 3, Haptic Touch Device

Set up:

1.  Connect Quest 3 and Haptic Touch Device with respective USB cables to a computer, as well as the power connector to the Haptic Touch Device to an outlet. (Note: Haptic Touch Device Firmware must be installed on any pc using the device)

2. Connect USB Cable to Haptic Touch Device and Computer

3. Connect power connector to the Haptic Touch Device

4. Ensure that Haptic Touch Device Driver is installed on the PC otherwise the pen will be unresponsive (Haptic Device Drivers - Download OpenHaptics Touch Device Driver v2023.10.11 and run the calibration if using for a new pc)

5. Launch the “3D Systems Touch Demo” From the desktop folder

Controls/Navigation: 

• Move the pen to interact with objects in each stage, physically touch and feel responses from different objects

• Touch arrows at the bottom of the stage to move to different stages

• Front button on the stylus will grab certain objects when held

• Rear button on the stylus will draw in the 3d pen stage

• Many stages contain blocks with wording on them, the wording tells you what will happen when it is touched such as resetting a station

Gameplay: 

1. Player will start in front of a mirrored model of the 3d touch device

2. Interact with objects at different stages to see different capabilities of the touch device