Specs and Maintenance

Specs: The Markforged Onyx Pro is a professional-grade composite desktop 3D printer featuring a 320 x 132 x 154 mm build volume, utilizing dual nozzles for Continuous Filament Fabrication (CFF) to embed fiberglass reinforcement into Onyx (micro carbon fiber-filled nylon) parts. Key specifications include a 100 μm minimum layer height, second-generation extruder, and Eiger cloud-based software, delivering high-strength, functional parts with a 16 kg footprint.

Maintenance: Maintenance of this piece of equipment requires a few steps.

• Wash the print bed with a sponge and water (no soap) to remove old glue.
• Remove debris from the print chamber, specifically the vacuum groove.
• Check nozzles and material tubes for wear or damage.
• Empty wiping station bins and check brushes.
• Plastic nozzles (3,200cc) and fiber nozzles (750cc) must be replaced when prompted by the screen banner.
• Adjust belts every 500 print hours.
• Perform a bed level calibration every 10-20 prints, or if adhesion issues occur.
• Periodically clean and lubricate rails.